Injap Ekzos Komposit CARX

1. PengenalanKERETACompositExhaustValve

KERETAcompositexhaustvalve is the most commonly used exhaustvalve, which is combined and improved on the basis of floating ball and floating ball lever exhaustvalve. KERETAcompositexhaustvalve uses floating ball lever type exhaustdevice for micro exhaustunder pressure state; it uses floating ball type exhaustdevice for first water filling or a large number of intake and exhaustunder other conditions, which can increase the size of intake and exhaustport and greatly improve the intake and exhaustspeed. Milestone Valve Co. Ltd. is a professional valve manufacturer and a high-tech enterprise integrating industry and trade. Its valves are not only widely used in China, but also exported to many foreign markets.

2. Technical parameters of KERETAcompositexhaustvalve

3. Ciri-ciri dariKERETACompositExhaustValve

1) The KERETAcompositexhaustvalve body is barrel shaped, and the valve internals include stainless steel ball, stem and disc. 
2) The KERETAcompositexhaustvalve is installed at the pump outlet or in the water supply and distribution pipeline to remove the air accumulated in the pipeline, so as to improve the service efficiency of the pipeline and the pump. Once the negative pressure is generated in the pipeline, the valve quickly inhales the outside air to prevent the pipeline from being damaged due to the negative pressure.

4. Prinsip kerjaKERETACompositExhaustValve 

When water is injected into the pipe, the valve disc of KERETAcompositexhaustvalve is in the open position to exhausta large amount of air. When the air is exhausted, the valve disc of KERETAcompositexhaustvalve is in the open position The valve is full of water, and the floating ball rises and drives the valve disc to close to stop the exhaust. When the water in the pipe is normally transported, if a small amount of air accumulates in the valve to a certain extent, the water level in the valve will drop, and the floating ball will drop. At this time, the air will be discharged from the small hole. When the water pump stops, the water flow in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug is quickly opened to inhale air to ensure the safety of the pipeline.

5. Pembungkusan dan Penghantaran

6. Soalan Lazim

1. Bolehkah saya mempunyai pesanan sampel untuk injap?
J: Ya, kami mengalu-alukan pesanan sampel untuk menguji dan memeriksa kualiti, Sampel campuran diterima.
2. Adakah anda mempunyai had MOQ untuk pesanan injap?
A: MOQ rendah, 1 PC untuk pemeriksaan sampel tersedia.
3. Bolehkah anda menawarkan perkhidmatan OEM?
J: Ya, OEM tersedia.
4. Bagaimana dengan pembayaran?
J: Kami biasanya menerima deposit 30%, dan baki akan dibayar sebelum penghantaran. L7C OK
5. Berapakah masa penghantaran injap rama-rama anda?
J: Untuk kebanyakan ukuran, DN50-DN600, kami mempunyai stok bahagian injap, mungkin untuk dihantar dalam 1-3 minggu, ke pelabuhan laut Tianjin terdekat.
6. Adakah jaminan produk anda?
J: Kami biasanya menawarkan jaminan selama 12 bulan dalam perkhidmatan atau 18 bulan sejak tarikh penghantaran.
7. Apakah standardisasi produk anda?
J: GB / T12238-2008, JBfT 8527-1997, API 609, EN 593-1998, DIN 85003-3-1997

7. Maklumat Hubungan